Lasso Overview

Instructions for Lasso

Included items: 1. Lasso Series 10 Smart chain lock, 100cm 2. Magnetic charging pogo cable 3. SmartMotion Key

SmartMotion Key instructions + troubleshooting:

• Needs to be within 1 meter to be recognized by the lock

• Motion activated and will turn off after 30 seconds of no motion

• If issues arise while moving it and you cannot unlock the chain, open the smart key with a Philips screwdriver, remove the CR2032 battery and re-install and test again

Lasso instructions :

• To unlock, press the home button pad directly under the LED for 1 seconds (LED will turn white) then unlocking begins when LED blinks green. Unlock connector handle. When unlocked, LED will blink blue every 2 seconds.

• To lock, plug in the connector handle to the smart chain receiver end unlock the LED blinks red. When locked, LED will blink red every 5 seconds

• To charge, attach the magnetic charging pogo cable with the charging port below the home button pad.

• If issues arise where the lock is mechanically locked but the connector handle is not plugged in, follow the unlock instructions above

• If issues arise where the connector handle is plugged in but the smart chain receiver end does not mechanically lock, remove connector handle for 5 seconds and try again